The ToxiRAE Pro is a wireless personal monitor for toxic gases & oxygen. The ToxiRAE Pro takes protection to the next level by providing safety professionals wireless access to real-time instrument readings & alarm status from any location for better visibility & faster response.
The ToxiRAE Pro can detect a broad range of gases from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and phosgene2. The ToxiRAE Pro’s intelligent interchangeable sensors store calibration data, so if you need to monitor one gas one day and another gas the next, swapping the sensors in your ToxiRAE Pro is all it takes.
• Over twenty intelligent interchange- able sensor options to cover a wide variety of gases2
• Easy to maintain with replaceable sensor, filter, and Lithium-ion battery
• Fully-automated bump testing and calibration with AutoRAE 22
•Wireless access to real-time instrument readings and alarm status from any location
•Unmistakable five-way local and remote wireless notification of alarm conditions
•Intelligent sensors store calibration data, so they can be swapped in the field3
•Largest display in its class
•Reliable, rugged, and intrinsically safe
•Continuous datalogging
|
Our Price £P.O.A
Comes Complete with:
- ToxiRAE Pro monitor with sensor as specified, alligator clip, protective rubber boot, and rechargeable battery installed
- Charging and PC communication cradle
- PC communication cable
- AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC)
- Calibration adapters
- Quick Start Guide
- CD with documentation
- ProRAE Studio II software for PC-based instrument configuration and data management
- Calibration card, quality certificate, packing list and warranty/registration card
|
| Drager X-am 2000 Specifications |
| Size |
4.6"Hx2.4"Wx1.2"D(118x60x30mm) |
| Weight |
7.76 oz. (220 g). |
Sensor
|
Over 20 intelligent interchangeable field-replaceable electrochemical sensors2. |
Battery
|
Rechargeable Lithium-ion battery
- Operating time: > 30 hours (normal operation)
- Recharge time: < 4 hours through charging cradle. |
Display
|
Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) |
Display Readout
|
- Real-time reading of gas concentrations in parts per million (ppm); battery status; data logging on/off; wireless on/off and reception quality.
- STEL, TWA, and peak values |
| KeyPad |
2 buttons for operation and programming |
| Sampling |
Diffusion |
Calibration
|
Automatic with AutoRAE 2 Test and Calibration Station2 or manual |
Alarm Modes
|
Wireless remote alarm notification1,2; audible (95 dB @ 30 cm), vibration, visible alarm (flashing bright red LEDs), and on-screen indication of alarm conditions - Additional diagnostic alarm and display message for low battery |
Datalogging
|
- Continuous datalogging with a three-month capacity (at one-minute intervals) - User-configurable datalogging interval (from 1 to 3,600 seconds) |
Communication & Data Download
|
- Data download and instrument set-up on PC via charging and PC comm. cradle
- Data download via AutoRAE 2 Automated Test and Calibration Station2
- Wireless data and status transmission1 via built-in RF modem (optional) |
Wireless Network
|
RAE Systems Dedicated Wireless Network |
| Wirelwss Frequency |
ISM license-free bands |
| Wireless Range |
300 feet (100 meters) |
| Operating Temp |
-4° to 131°F (-20° to 55°C) |
Humidity
|
0% to 95% relative humidity (non-condensing) |
Dust & Water Protection
|
IP-65 rating for dust and water ingress protection (validated by an independent test laboratory) |
Atex Certification
|
ATEX: , II 1G, Ex ia IIC Ga T4
IECEx: Ex ia IIC Ga T4 |
Warranty
|
- Two years on non-consumable components and CO, H2S, and O2 sensors
- One year on all other sensors, battery, and other consumable parts |
|
